June 16, 2006, Newsletter Issue #20: Power Washer Safey: Check and Inspect

Tip of the Week

It's a good idea to make sure everything is in working order each time before you start using your pressure washer. Here are a few power washer safety tips on things to inspect before you use your unit:

Take a look at your hose and make sure there are no cuts or leaks. If there are, you should replace the hose.

Check your fuel levels to make sure your oil and fuel aren't low and change the oil if necessary.

If you have inflatable tires, check the air pressure and keep it within manufacturer recommended levels.

Test your spray wand assembly and replace any damaged or worn parts like the O-rings. Clean out your nozzle or replace if need be.

About LifeTips

Now one of the top on-line publishers in the world, LifeTips offers tips to millions of monthly visitors. Our mission mission is to make your life smarter, better, faster and wiser. Expert writers earn dough for what they know. And exclusive sponsors in each niche topic help us make-it-all happen.

Exclusive Sponsor

Need a little more scrubbing power? Want to increase your cleaning efficiency?

Ultimate Washer offers a variety of Rotary Nozzles from which you can choose. Your cleaning time can be cut in half with the addition of this nozzle. These nozzles rotate at high speeds to increase the intensity of the spray. They can remove rust, graffiti, and barnacles from the bottom of boats just to mention a few. They can be used on pressure washers with as little as 3000 PSI up to the super heavy duty pressure washers whose PSI reaches 5000 PSI. Find more info at http://www.ultimatewasher.com/pressure-washer-rotary-nozzles.htm

Not finding the advice and tips you need on this Pressure Washers Tip Site? Request a Tip Now!

Guru Spotlight
Patricia Walters-Fischer