Listen to 300+ podcasts by best-selling authors, published Wednesday, 4pm EST!

Troubleshooting Pressure Washer Soap Injector

Read this tip to make your life smarter, better, faster and wiser. LifeTips is the place to go when you need to know about Troubleshooting Your Pressure Washer and other Pressure Washers topics.

Troubleshooting Pressure Washer Soap Injector

When a soap injector is not working properly, the problem is generally fairly easy to isolate. Check the following:

1. If you have interchangeable tips, make sure the Black, soap tip is installed. Soap injectors will not work when high pressure nozzles are installed.
2. Be sure that the soap injector valve is turned on, and turn selector valve to desired setting.
3. A piece of debris may be caught in the injector valve, injector ball valve, or orifice. Disassemble and clean the injector.
4. If you have an adjustable nozzle, be sure it is in the low pressure position(away from the gun) to draw soap.

   

Comments

9/6/2007 6:11:04 AM
Ron Vetor said:

When I let off of the trigger water goes into soap bottle. Is there supposed to be some kind of ball in pump to stop this? I took the pump apart and cleaned it maybe I didn't put it back together right. PLEASE ADVISE


9/14/2009 10:04:06 AM
George said:

Also if you are useing to long of a Pressure Hose it will not work.Always use Pump Saver to keep all inside parts clean and free from problems.


4/10/2015 10:50:19 AM
Barbara Lester said:

My soap dispenser is putting out water instead of taking in soap?




Name:


URL: (optional)


Comment:


Not finding the advice and tips you need on this Pressure Washers Tip Site? Request a Tip Now!


Guru Spotlight
Heidi Splete