January 9, 2009, Newsletter Issue #150: Troubleshooting Pressure Washer Soap Injector

Tip of the Week

When a soap injector is not working properly, the problem is generally fairly easy to isolate. Check the following:

1. If you have interchangeable tips, make sure the Black, soap tip is installed. Soap injectors will not work when high pressure nozzles are installed.
2. Be sure that the soap injector valve is turned on, and turn selector valve to desired setting.
3. A piece of debris may be caught in the injector valve, injector ball valve, or orifice. Disassemble and clean the injector.
4. If you have an adjustable nozzle, be sure it is in the low pressure position(away from the gun) to draw soap.

About LifeTips

Now one of the top on-line publishers in the world, LifeTips offers tips to millions of monthly visitors. Our mission mission is to make your life smarter, better, faster and wiser. Expert writers earn dough for what they know. And exclusive sponsors in each niche topic help us make-it-all happen.

Exclusive Sponsor

Need a little more scrubbing power? Want to increase your cleaning efficiency?

Ultimate Washer offers a variety of Rotary Nozzles from which you can choose. Your cleaning time can be cut in half with the addition of this nozzle. These nozzles rotate at high speeds to increase the intensity of the spray. They can remove rust, graffiti, and barnacles from the bottom of boats just to mention a few. They can be used on pressure washers with as little as 3000 PSI up to the super heavy duty pressure washers whose PSI reaches 5000 PSI. Find more info at http://www.ultimatewasher.com/pressure-washer-rotary-nozzles.htm

Not finding the advice and tips you need on this Pressure Washers Tip Site? Request a Tip Now!


Guru Spotlight
Phyllis Serbes